20. The most common type of oil distribution device is a simple orifice which directs a metered amount of
oil onto its target. These jet orifices are positioned as close to the target area as possible to overcome the
possibility of the local turbulent environment deflecting the jet of oil. The smallest diameter of a jet
orifice is 0.04 inch which allows a flow of 12 gallons per hour when operating at a pressure of 40 lb. per
sq. in. The use of restrictors upstream can reduce the flow rate if required.
 |
| Fig. 8-5 Principle of a gear pump. |
21. All engines transfer heat to the oil by friction, churning and windage within a bearing chamber or
gearbox. It is therefore common practice to fit an oil cooler in recirculatory oil systems. The cooling
medium may be fuel or air and, in some instances, both fuel-cooled and air-cooled coolers are used.
22. Some engines which utilize both types of cooler may incorporate an electronic monitoring system
which switches in the air-cooled cooler only when it is necessary. This maintains the ideal oil temperature
and improves the overall thermal efficiency.
